factograf
EN
Sign in

Japanese experimental high speed train type

300X

300X
All data from the card 23
In service
1994–2002
Manufacturers
Hitachi, Kawasaki Heavy Industries, Mitsubishi Heavy Industries, Nippon Sharyo
Constructed
1994
Scrapped
2002
Number built
6 vehicles
Number in service
None
Number preserved
2 vehicles
Number scrapped
4 vehicles
Formation
6 cars
Fleet numbers
A0
Operator
JR Central
Depot
Tokyo
Line served
Tōkaidō Shinkansen
Car body construction
Aluminium alloy
Car length
27,150 mm (89 ft 1 in) (end cars) 25,000 mm (82 ft 0 in) (intermediate cars)
Width
3,100 mm (10 ft 2 in)
Height
3,300 mm (10 ft 10 in)
Maximum speed
350 km/h (220 mph) (nominal)
Traction system
500 kW (670 hp) motors (4 per car)
Power output
12 MW (16,000 hp)
Electric system
25 kV AC, 60 Hz Overhead catenary
Current collection
Pantograph
Track gauge
1,435 mm (4 ft 8+1⁄2 in) standard gauge

"300X" was the name given to the Class 955 (955形) 6-car experimental Shinkansen train developed in 1994 by the Central Japan Railway Company (JR Central) in Japan to test technology to be incorporated in future shinkansen trains operating at speeds of 300 km/h (186 mph) or higher.

Design

Manufacture of the train was shared among four different manufacturers, with a number of different body construction methods used. The two ends cars employed differing nose designs, and a number of pantograph shroud designs were tested over the lifetime of the trainset.

Formation

Closeup view of rubber diaphragm between cars, September 2000
Closeup view of rubber diaphragm between cars, September 2000
Car No. 1 2 3 4 5 6
Designation Mc M M M M Mc
Numbering 955-1 955-2 955-3 955-4 955-5 955-6
Weight (t) 36 36 36 32 36 36

Cars 2 and 5 were fitted with pantographs.

955-1

End car with "cusp" nose design, built by Mitsubishi Heavy Industries. The body was constructed of rivetted Duralumin. This car had no passenger seats.

955-2

The body was constructed by Nippon Sharyo using large hollow aluminium extrusions. This was the only car in the trainset to be fitted with passenger seats.

955-3

This vehicle was constructed by Kawasaki Heavy Industries using spot-welded large aluminium extrusions and was fitted with active tilting.

955-4

This vehicle was constructed by Nippon Sharyo using large hollow aluminium extrusions, similar to car 2, and was equipped with large side doors for installing and removing test equipment.

955-5

This vehicle was constructed by Hitachi using aluminium honeycomb panels. This car had no seats.

955-6

Hitachi-built end car with "wedge" nose design. The body was constructed of brazed aluminium honeycomb panels.

History

"300X" trainset on a daytime test run at Maibara Station, July 1999
"300X" trainset on a daytime test run at Maibara Station, July 1999
443.0 km/h speed record sticker on car 955-6
443.0 km/h speed record sticker on car 955-6
2 images

The train was unveiled on 22 December 1994.

Test-running on the Tōkaidō Shinkansen was delayed by track damage caused by the Great Hanshin earthquake in January 1995, but full-scale test-running commenced on 25 May 1995, between Maibara and Kyoto.

On 21 September 1995, the Class 955 train recorded a maximum speed of 354.1 km/h (220.0 mph) on the Tokaido Shinkansen between Maibara and Kyoto.

On 11 July 1996, the train recorded a maximum speed of 426.6 km/h (265.1 mph), exceeding the previous national speed record of 425.0 km/h (264.1 mph) set in December 1993 by JR East's Class 952/953 "STAR21" experimental train.

On 26 July 1996, the train recorded a Japanese national speed record of 443.0 km/h (275.3 mph) on the Tokaido Shinkansen between Maibara and Kyoto. This record still stands.

The Class 955 trainset was officially withdrawn on 1 February 2002.

Preservation

Car 955-1 preserved at Maibara, July 2006
Car 955-1 preserved at Maibara, July 2006
Car 955-6 preserved at Hamamatsu Works, July 2006
Car 955-6 preserved at Hamamatsu Works, July 2006
Car 955-6 preserved at the SCMaglev and Railway Park in Nagoya, June 2011
Car 955-6 preserved at the SCMaglev and Railway Park in Nagoya, June 2011
3 images

End car 955-1 is preserved outdoors at the RTRI large-scale wind tunnel test facility in Maibara, Shiga. End car 955-6 was initially preserved inside JR Central's Hamamatsu Works, and was moved to the new SCMaglev and Railway Park in 2010.

Read next

In 7 languages

Text from Wikipedia, CC BY-SA 4.0 · Source article